| Author | Thread |
|
|
03/28/2009 11:15:25 AM · #1 |
I need to take a picture of a ~5x7 picture that is on a wooden plaque. It is "glossy" but not outrageously so. It will be used primarily to project on a wall at a fairly low resolution and as a small print at a low res. It has a slight texture that is barely viewable unless it is angled in the light. It is fairly old, so the colors are also somewhat faded.
Should I use my light tent? Set it up so that it is perpendicular to the camera? etc?
|
|
|
|
03/28/2009 11:24:31 AM · #2 |
| a CP filter might help kill some of the gloss. |
|
|
|
03/28/2009 11:28:44 AM · #3 |
|
|
|
03/28/2009 11:34:49 AM · #4 |
CP is a good idea.
Scanning is the next option. |
|
|
|
03/28/2009 11:37:17 AM · #5 |
i don't know what you have for a scanner. but i've used a couple that have options for scratch/spot repair and color correction when the image is scanned. might make life simpler if the photo of the photo is going to require a bunch of time in PS cloning and what not.
|
|
|
|
03/28/2009 11:49:06 AM · #6 |
Originally posted by soup:
i don't know what you have for a scanner. but i've used a couple that have options for scratch/spot repair and color correction when the image is scanned. might make life simpler if the photo of the photo is going to require a bunch of time in PS cloning and what not. |
exactly what I was thinking. |
|
Home -
Challenges -
Community -
League -
Photos -
Cameras -
Lenses -
Learn -
Help -
Terms of Use -
Privacy -
Top ^
DPChallenge, and website content and design, Copyright © 2001-2025 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 08/26/2025 04:32:01 PM EDT.
