DPChallenge: A Digital Photography Contest You are not logged in. (log in or register
 

DPChallenge Forums >> Tips, Tricks, and Q&A >> Cloudy and overcast but still too bright..
Pages:  
Showing posts 1 - 5 of 5, (reverse)
AuthorThread
09/18/2006 02:20:00 PM · #1
...how do you shoot in that situation? I was using a polarizer to counter the brightness of the sky, but the subjects were still coming out dark (action situation, no fancy lighting or reflectors to be had). But if I took the polarizer off, then the sky and concrete were too bright or gave off a fair bit of glare. I was shooting at 400 ISO and a quick shutter since it was skateboarders and other action stuff.
09/18/2006 02:22:02 PM · #2
Use a fill flash.
09/18/2006 02:43:32 PM · #3
Polarizer in overcast situations is a bad idea, usually. The effect on the sky is minimal, but ALL the shadow illumination comes from reflected light and the polarizer cuts that down dramatically, so the end result is usually MORE contrast, not less, and it's even harder to compensate for in PP.

R.
09/18/2006 02:48:52 PM · #4
Fill flash and choose a different angle as not to include the sky.
09/18/2006 04:04:11 PM · #5
Yep, use some fill flash and expose for the subjects rather than the sky.

My Canon point and shoot actually had a pretty high X-sync speed for the flash, it was easier to stop motion with fill flash than with 1/200th on my XT. Yours should be similar, so as long as you get the exposure right you shouldn't have any issues using flash and moving subjects.
Pages:  
Current Server Time: 09/03/2025 07:13:53 PM

Please log in or register to post to the forums.


Home - Challenges - Community - League - Photos - Cameras - Lenses - Learn - Help - Terms of Use - Privacy - Top ^
DPChallenge, and website content and design, Copyright © 2001-2025 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 09/03/2025 07:13:53 PM EDT.