DPChallenge: A Digital Photography Contest You are not logged in. (log in or register
 

DPChallenge Forums >> Hardware and Software >> My new studio setup!
Pages:  
Showing posts 1 - 15 of 15, (reverse)
AuthorThread
05/05/2006 11:57:13 AM · #1
Woot!! I just had to share this! I finally got myself some decent gear! 2 x Bowens Esprit Gemini 500watt heads complete with remote triggers. Cost me a fortune but I love them!

Whole setup is now:
2 x Bowens Esprit Gemini 500 watt heads
2 x Bowens Pulsar remote triggers (one to send one to receive)
2 x Godox slave flashes
110 cm 5 in 1 reflector and stand
Kast backdrop stand
4 different coloured paper backdrop rolls
Polaris Dual 5 light meter

Now I just have to learn how to take a decent photo! ;)


05/05/2006 12:01:21 PM · #2
congrat!

how much you spent on this whole setting?
05/05/2006 12:07:39 PM · #3
dude thats cool, my first studio gear is a bowens esprit 1000 w, and im just waiting for another job to buy the two 500 w bowens kit with that im stand
05/05/2006 12:16:15 PM · #4
Originally posted by colacat:

congrat!

how much you spent on this whole setting?


Hmmm...the most expensive was obviously the BOwens gear. I got a kit with the 2 heads, stands, softbox and umbrella and added the two triggers which cost me about $2900 (Aus). The Polaris Lightmeter set me back $500 (Aus), backdrop stand $150 (Aus), about $100 for the 2 slave flashes and stands (yeah...cheap arse imported from China but they work) and about $600 (Aus) for the backdrops!
05/05/2006 01:01:10 PM · #5
4250 Australian Dollars = 3276.31 American Dollars

1 USD = 1.29719 AUD
1 AUD = 0.770897 USD
05/05/2006 01:05:58 PM · #6
let me ask you , what size paper background is that, i have an either 8 or 9 foot one, and its huge, what size is that.
05/05/2006 01:19:31 PM · #7
Originally posted by TroyMosley:

let me ask you , what size paper background is that, i have an either 8 or 9 foot one, and its huge, what size is that.


It's 2.75 meters x 11 meters so I think in feet it works out to about 9! The stand will go to a max of 3 meters in width!

EDIT: The photo is a little bit deceiving in that the room is about 4.5 meters wide x about 7 meters!

Message edited by author 2006-05-05 13:21:25.
05/05/2006 01:22:29 PM · #8
wow...

you are addicted to Photography
05/05/2006 01:25:33 PM · #9
Originally posted by colacat:

wow...

you are addicted to Photography


Hehehe.....doesn't mean I can actually do it...but I'm trying! ;)
05/05/2006 01:43:29 PM · #10
Cool, congrats. Pretty much the same setup I got and I love it. Didn´t spend money on the remote triggers, I just put the flashes on "cell" and use my external flash set at manual and 1/128 to trigger them, well except when I am outside of course, then I use the sync cable.
05/05/2006 01:47:35 PM · #11
you will finally get something from this respecting every dollor you spent on this equipment. ^_^
05/05/2006 01:49:48 PM · #12
Originally posted by Larus:

Cool, congrats. Pretty much the same setup I got and I love it. Didn´t spend money on the remote triggers, I just put the flashes on "cell" and use my external flash set at manual and 1/128 to trigger them, well except when I am outside of course, then I use the sync cable.


Cheers! Yeah, I was unsure whether to get the triggers or not because I could of used my Safe Sync to hook direct to the lights and just put them on cell...but then I thought "what's another $700??"! Gives me a tad more freedom! I hated the cable on my last set of lights!
05/05/2006 01:54:18 PM · #13
Originally posted by Makka:

Originally posted by Larus:

Cool, congrats. Pretty much the same setup I got and I love it. Didn´t spend money on the remote triggers, I just put the flashes on "cell" and use my external flash set at manual and 1/128 to trigger them, well except when I am outside of course, then I use the sync cable.


Cheers! Yeah, I was unsure whether to get the triggers or not because I could of used my Safe Sync to hook direct to the lights and just put them on cell...but then I thought "what's another $700??"! Gives me a tad more freedom! I hated the cable on my last set of lights!


Ummm, not sure who is misunderstanding whom but what I mean is, using a external flash (like a 550ex or 580ex) at manual and (preferrably but not neccesarily at a low power, just set a low power to increase refresh rate and save the batteries of your flash) will just trigger the bowens lights if you set them at "cell", no cables or nothing required.
05/05/2006 10:24:29 PM · #14
Originally posted by Larus:

Originally posted by Makka:

Originally posted by Larus:

Cool, congrats. Pretty much the same setup I got and I love it. Didn´t spend money on the remote triggers, I just put the flashes on "cell" and use my external flash set at manual and 1/128 to trigger them, well except when I am outside of course, then I use the sync cable.


Cheers! Yeah, I was unsure whether to get the triggers or not because I could of used my Safe Sync to hook direct to the lights and just put them on cell...but then I thought "what's another $700??"! Gives me a tad more freedom! I hated the cable on my last set of lights!


Ummm, not sure who is misunderstanding whom but what I mean is, using a external flash (like a 550ex or 580ex) at manual and (preferrably but not neccesarily at a low power, just set a low power to increase refresh rate and save the batteries of your flash) will just trigger the bowens lights if you set them at "cell", no cables or nothing required.


No misunderstanding. Even if I synced one light direct to the camera by cable the other would still need to be on cell to fire.
05/05/2006 10:28:03 PM · #15
Congrats you two...I know you will just love the new setup.
Pages:  
Current Server Time: 06/21/2025 09:00:34 PM

Please log in or register to post to the forums.


Home - Challenges - Community - League - Photos - Cameras - Lenses - Learn - Help - Terms of Use - Privacy - Top ^
DPChallenge, and website content and design, Copyright © 2001-2025 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 06/21/2025 09:00:34 PM EDT.