| Author | Thread |
|
|
04/22/2005 05:04:18 PM · #1 |
I have a question. I was printing a photo and when it was done printing I got a message that I needed to replace the photo cyan and photo magenta. I replaced both cartridges and then went to the BJ printer utility to check the in levels and it shows that the photo cyan and photo magenta are low. I click the update button but it still shows low.
Any suggestions how to get the ink levels back to full?
Thanks
|
|
|
|
04/22/2005 05:07:12 PM · #2 |
restart both PC and Printer
|
|
|
|
04/22/2005 05:12:57 PM · #3 |
Mine resets when I start the next print job.
|
|
|
|
04/22/2005 07:03:07 PM · #4 |
Be careful of the messages to change the cartridges. They error on the side of caution so they do not run out and normally the message pops up a fair amount of time before the cartridge is actually out or low. I normally run mine even if it says it is low and always finish at least one more print job when it says it is out. Ink is their money maker.
|
|
|
|
04/22/2005 07:37:00 PM · #5 |
Thanks everyone!
Stupid me, replaced the cyan and magenta not the "photo cyan and photo magenta"
As soon as I replaced the correct cartridges, the ink levels appeared correctly!
|
|
|
|
04/22/2005 07:56:24 PM · #6 |
Originally posted by qmdi:
Thanks everyone!
Stupid me, replaced the cyan and magenta not the "photo cyan and photo magenta"
As soon as I replaced the correct cartridges, the ink levels appeared correctly! |
Yes - on my Canon i9100, I can usually ignore the low/out of ink warning once (sometimes twice) before replacing the cartridge. This experience is based on printing 8x10 prints though, and I always visually inspect the ink level in the sponge part of the cartridge before proceeding. |
|
Home -
Challenges -
Community -
League -
Photos -
Cameras -
Lenses -
Learn -
Help -
Terms of Use -
Privacy -
Top ^
DPChallenge, and website content and design, Copyright © 2001-2025 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 08/14/2025 08:27:39 PM EDT.
