Author | Thread |
|
01/03/2012 05:14:51 PM · #501 |
Not a bullet, but as strong as one.
Originally posted by Cory:
Bullet? looks like lead and copper to me. |
|
|
|
01/03/2012 05:17:01 PM · #502 |
Originally posted by PGerst: HAHA..ok, good questions, I'll answer them this way.
Its a scratch and irrelevant to figuring out what it is.
I don't know the composition off hand, but I'll look them up later and post them after a few more failed guesses :)
Look at the image information for both the camera and lens to figure out the size. The lens was about 10 cm away.
Originally posted by kirbic: OK, some specific questions:
1.) Is the near-vertical mark in the top section actually a split, or just a very straight scratch?
2.) If a split, is this part of the function of the part?
3.) Is the center layer copper?
4.) Is the powdery-looking surface below the coppery layer actually corroded, or is it something else?
5.) Assuming the part is round, what's the approximate outside diameter? | |
Is it round? That's a very reasonable question, because the lens could distort a straight object to look very round, but I'm guessing that your macro lens doesn't have that much barrel distortion.
|
|
|
01/03/2012 06:44:35 PM · #503 |
Yes. It is round, no distortion in the image. It is a small section of a bigger piece.
Originally posted by Cory:
Is it round? |
|
|
|
01/03/2012 07:12:53 PM · #504 |
|
|
01/03/2012 07:52:40 PM · #505 |
Nope.. Originally posted by kawesttex: Sharpening stone |
|
|
|
01/03/2012 08:44:08 PM · #506 |
On the inside of the circle, at the bottom of pic, is that a copper brush material?
Message edited by author 2012-01-03 20:44:33.
|
|
|
01/03/2012 10:07:46 PM · #507 |
I just looked at the other images, I think mine may be too out there...ok...hints.
Main metal: Alumninum
Hint: 1 of 4, 6, or 8
If there aren't enough guesses by 11, I'll post an expanded photo.
Message edited by author 2012-01-03 22:17:21. |
|
|
01/03/2012 10:31:52 PM · #508 |
Is it the top of an engine cylinder with the head removed?
|
|
|
01/03/2012 10:35:56 PM · #509 |
Originally posted by kirbic: Is it the top of an engine cylinder with the head removed? |
That's what I was thinking, but it seems sort of flimsy for a cylinder... Still, "4, 6, or 8"?
R.
|
|
|
01/03/2012 10:45:59 PM · #510 |
|
|
01/03/2012 10:59:44 PM · #511 |
I had seen those photos earlier, so I had to stay out of that one. Good mystery shot though PGerst. It's good that story had a happy ending for you. |
|
|
01/03/2012 11:19:22 PM · #512 |
Here 'tis:
Getting the general idea of what it is may be quite easy. I will require a very specific answer for this one.
|
|
|
01/03/2012 11:37:08 PM · #513 |
A indoor ceiling made in to a giant LG television.
Most likely LED's
Message edited by author 2012-01-03 23:40:18.
|
|
|
01/03/2012 11:40:56 PM · #514 |
The ceiling at The Mall of the Americas?
|
|
|
01/03/2012 11:42:25 PM · #515 |
Originally posted by SDW: A indoor ceiling made in to a giant LG television.
Most likely LED's |
I didn't think it would be long before someone noticed the LG logo. Yes, it is a large display. I will require the location of the display.
|
|
|
01/03/2012 11:43:42 PM · #516 |
Originally posted by Bear_Music: The ceiling at The Mall of the Americas? |
Nope, but you may be heading roughly in the right direction. You might have perhaps turned right in error ;-)
|
|
|
01/03/2012 11:47:41 PM · #517 |
|
|
01/03/2012 11:49:21 PM · #518 |
I was guessing it was a ceiling at a trade show or at an airport terminal... Apr 3rd 2008...
Can't find anything about such a beast though. Interesting support poles or sculptures or ... whatever those are..
ETA, could also very easily be a cruise ship.
Message edited by author 2012-01-03 23:50:48. |
|
|
01/03/2012 11:49:25 PM · #519 |
Originally posted by IAmEliKatz: Vegas? |
Yes, in fact, but where?
|
|
|
01/03/2012 11:53:28 PM · #520 |
Originally posted by kirbic: Originally posted by IAmEliKatz: Vegas? |
Yes, in fact, but where? |
//www.youtube.com/watch?v=cUhACtKUuX0
Binions |
|
|
01/03/2012 11:53:52 PM · #521 |
The key was those silly supports. :)
ETA:.. Oh crap, I just wanted to win. Not post something... Give me a minute. Hmm. darn.
Message edited by author 2012-01-03 23:54:18. |
|
|
01/03/2012 11:54:40 PM · #522 |
opps
Message edited by author 2012-01-03 23:55:19.
|
|
|
01/03/2012 11:58:57 PM · #523 |
Yeh, I'll accept that. Technically, it's the "Fremont Street Experience" and it runs two blocks or more along Fremont; Binions is within that stretch.
ETA: It's fun to see, I've been there on two or three different occasions. I used to attend a conference in Vegas annually, I'm not really into Vegas as a destination in itself.
ETA: I was hoping that one would be quick... I didn't want to be up half the night!
Message edited by author 2012-01-04 00:02:27.
|
|
|
01/04/2012 12:07:07 AM · #524 |
Ok. For those who know me, or quickly search my portfolio, the general category should be quickly obvious (as if it isn't anyway IMO) ..
I am looking to hear a specific description, two particular words. :) good luck, I'll provide a strong hint at #10 if no one has gotten it...
 |
|
|
01/04/2012 12:10:42 AM · #525 |
|
Home -
Challenges -
Community -
League -
Photos -
Cameras -
Lenses -
Learn -
Help -
Terms of Use -
Privacy -
Top ^
DPChallenge, and website content and design, Copyright © 2001-2025 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 08/05/2025 01:31:08 PM EDT.