Author | Thread |
|
12/21/2013 08:57:26 AM · #5876 |
Originally posted by C_Steve_G: Looks like a CAT cable connector die, perhaps the tool to crimp the plug to the cable. |
Bingo, network cable tool.. |
|
|
12/21/2013 08:29:41 PM · #5877 |
Originally posted by Cory: ...
Bingo, network cable tool.. |
Oh, Jeez, just got off work... I'll find something this evening... |
|
|
12/21/2013 09:57:51 PM · #5878 |
OK, Here ya go >>>
I've blurred the bottom row of lettering because it states what the object is in that U.S. government nomenclature format. I made this in 1972 at an evening job while I was attending college.
Extra points if you can give the application. I certainly can't. I do know that we cut up 1/2 inch (13mm) thick sheets of soft plastic into 2" (50mm) squares, weighed a certain amount and stacked the squares, which were then placed into pressure molds, and out came these. The lettering was applied later. |
|
|
12/21/2013 10:25:59 PM · #5879 |
Robot Nipple milking modules? |
|
|
12/21/2013 11:12:43 PM · #5880 |
Originally posted by Bear_Music: Robot Nipple milking modules? |
Heh, heh, heh. But no.
The U.S. DoD was/is one of the end users. |
|
|
12/21/2013 11:18:40 PM · #5881 |
|
|
12/21/2013 11:23:33 PM · #5882 |
Those holes on the side appear to possibly be a place to put screws. No real idea, however.
|
|
|
12/22/2013 02:14:07 AM · #5883 |
Originally posted by Cory: Electrical Insulator. |
I think, technically, it's a thermal insulator, but for what?
Originally posted by Yo_Spiff: Those holes on the side appear to possibly be a place to put screws. |
One hole is for a control feature, one is for an indicator, and I haven't learned what the third is for.
-------------------------
OK, calling it a day. Tomorrow, we'll continue. |
|
|
12/25/2013 07:23:58 PM · #5884 |
Is it part of a sleeve and cylinder type valve? |
|
|
12/25/2013 09:03:37 PM · #5885 |
It changes direction of flow. center is supply....upper is flow one direction as in one end of a cylinder to extend piston rod...lower is to other end of a cylinder to retract the piston rod. |
|
|
12/26/2013 02:23:49 AM · #5886 |
Originally posted by MelonMusketeer: Is it part of a sleeve and cylinder type valve? |
No, it's essentially a protective casing.
ETA: I'm thinking I chose something too esoteric. If you were in the military, in a specific occupation, on the flight-line in the '70s, you likely saw these.
Anytime someone would like to post up another "izzit", please proceed. I'll give this two more days, then reveal all.
Message edited by author 2013-12-26 02:29:33. |
|
|
12/26/2013 09:17:40 AM · #5887 |
Originally posted by C_Steve_G: If you were in the military, in a specific occupation, on the flight-line in the '70s, you likely saw these. |
Well, I was in the AF in 80's, but I was in avionics and the previous hints sound like something associated with hydraulics.
|
|
|
12/26/2013 11:13:58 AM · #5888 |
A cover you remove when arming missiles? |
|
|
12/26/2013 01:22:18 PM · #5889 |
Well if it was what some of us though it was it works like I said that it would. |
|
|
12/26/2013 02:10:58 PM · #5890 |
College kid, weapons, my guess something simple. My guess, the part that makes the high pierced whistle as the bomb approaches the ground form high altitude bombing. |
|
|
12/27/2013 01:11:30 AM · #5891 |
Originally posted by Bear_Music: A cover you remove when arming missiles? |
Robert, you have the operative verb...
Originally posted by see: College kid, weapons, my guess something simple. My guess, the part that makes the high pierced whistle as the bomb approaches the ground form high altitude bombing. |
...and, Alan, you have the major assembly.
-----------------------------------------------------------
The printed description reads:
FUZE, BOMB, MECHANICAL, NOSE
THERMALLY PROTECTED M90(??? - last three characters illegible)
Below the left hole is printed:
"A" ON RED WHEN ARMED
Below the middle hole is printed:
REMOVE STOP SCREW FOR USE BELOW 6 SECONDS
--------------------------------------------
Looks like it's the casing for an M904 bomb fuse..., though all the images I can find on the 'net look more like metal casings. |
|
|
12/28/2013 12:31:23 AM · #5892 |
Huh, I can't believe I killed another thread.
Especially this one. |
|
|
12/28/2013 03:29:04 AM · #5893 |
So, who is up next? You didn't kill it, you just dropped a bomb.
Message edited by author 2013-12-28 03:29:42. |
|
|
12/28/2013 08:36:26 PM · #5894 |
I'd say either Alan or Robert (whomever is quickest!), but in the interest of continuity, I'd accept any challenge.
Originally posted by MelonMusketeer: So, who is up next? You didn't kill it, you just dropped a bomb. |
|
|
|
12/28/2013 09:36:32 PM · #5895 |
Give me a couple minutes, I'll post something up. Need to log into the desktop 'pooter...
|
|
|
12/28/2013 09:39:38 PM · #5896 |
Here we go:
ETA: For this one, I will take a somewhat generic description; extra points for the precise application, but not a requirement.
Message edited by author 2013-12-28 21:41:22. |
|
|
12/28/2013 10:46:40 PM · #5897 |
|
|
12/28/2013 10:58:21 PM · #5898 |
|
|
12/28/2013 10:59:25 PM · #5899 |
|
|
12/28/2013 11:07:11 PM · #5900 |
|
Home -
Challenges -
Community -
League -
Photos -
Cameras -
Lenses -
Learn -
Help -
Terms of Use -
Privacy -
Top ^
DPChallenge, and website content and design, Copyright © 2001-2025 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 07/27/2025 07:33:22 PM EDT.