DPChallenge: A Digital Photography Contest You are not logged in. (log in or register) 
 

DPChallenge Forums >> General Discussion >> The "Whattheheckizzit?" game
Pages:   ... [80] [81] [82] [83] [84] [85] [86] [87] [88] ... [265]
Showing posts 2076 - 2100 of 6612, (reverse)
AuthorThread
 04/04/2012 04:14:14 PM · #2076


A wider view.
 04/04/2012 04:15:12 PM · #2077
Is it a stainless piece intended as a "drive pin" through impact?

Ha, cross posted, LOL.

OK, so it is a stainless mallet... from the surface finish, I presume it is used in a hot environment, perhaps a furnace?

Message edited by author 2012-04-04 16:16:53.
 04/04/2012 04:17:51 PM · #2078
Right material though.
 04/04/2012 04:26:28 PM · #2079
Originally posted by kirbic:
Is it a stainless piece intended as a "drive pin" through impact?

Ha, cross posted, LOL.

OK, so it is a stainless mallet... from the surface finish, I presume it is used in a hot environment, perhaps a furnace?


Nope, just heat treated for that finish. It's intended for use in a specific, controlled environment by a specially qualified, highly educated individual. I can pretty much guarantee that neither you or I will ever use this in the way it is intended, though we might know someone who has directly benefitted from its use.

Message edited by author 2012-04-04 16:37:07.
 04/04/2012 04:40:42 PM · #2080
dentists hammer?

Message edited by author 2012-04-04 16:42:15.
 04/04/2012 04:45:58 PM · #2081
a gavel
 04/04/2012 04:49:38 PM · #2082
Originally posted by apercep:
dentists hammer?


Close. I'm getting ready to head home for the day. If no one nails it by then, I'll post a full explanation.
 04/04/2012 05:00:00 PM · #2083
Originally posted by Spork99:
Originally posted by apercep:
dentists hammer?


Close. I'm getting ready to head home for the day. If no one nails it by then, I'll post a full explanation.


Ah, so if use in the mouth is "close," how about on the head?? Could it be "Maxwell's Silver Hammer?" ;-)

OK, a real guess: is it a mallet used within a nuclear reactor facility?
 04/04/2012 05:02:11 PM · #2084
Originally posted by kirbic:
Originally posted by Spork99:
Originally posted by apercep:
dentists hammer?


Close. I'm getting ready to head home for the day. If no one nails it by then, I'll post a full explanation.


Ah, so if use in the mouth is "close," how about on the head?? Could it be "Maxwell's Silver Hammer?" ;-)

OK, a real guess: is it a mallet used within a nuclear reactor facility?


Nope.

"Dentist" is close because it is used in the health field. It's not used on the head.
 04/04/2012 05:16:19 PM · #2085
it's used on the knee

eta: reflex hammer

Message edited by author 2012-04-04 17:18:22.
 04/04/2012 05:19:45 PM · #2086
Ah, I see my feeble attempt at humor has failed, LOL.

Is it a mallet intended for inserting a prosthesis into bone?
 04/04/2012 05:21:13 PM · #2087
Orthopedic surgery bone hammer?
 04/04/2012 05:54:41 PM · #2088
Originally posted by kirbic:
Ah, I see my feeble attempt at humor has failed, LOL.

Is it a mallet intended for inserting a prosthesis into bone?


It is exactly that. During a hip replacement, after the surgeon has sawn off the ball on the end of the femur and drilled the hole for the implant, he uses this hammer to pound it in.
 04/04/2012 06:16:45 PM · #2089
Originally posted by Spork99:
Originally posted by kirbic:
Ah, I see my feeble attempt at humor has failed, LOL.

Is it a mallet intended for inserting a prosthesis into bone?


It is exactly that. During a hip replacement, after the surgeon has sawn off the ball on the end of the femur and drilled the hole for the implant, he uses this hammer to pound it in.


Hip, hip hooray! ;-)

I will get something up shortly, I have been caught without anything queued up.
 04/04/2012 06:25:32 PM · #2090
Originally posted by kirbic:
Hip, hip hooray! ;-)

Oh boy.... after that joke, I think I knee'd a joint.
 04/04/2012 07:26:15 PM · #2091
Originally posted by fldave:
Originally posted by kirbic:
Hip, hip hooray! ;-)

Oh boy.... after that joke, I think I knee'd a joint.


OOOOOhhhh, cut me to the bone! ;-)
 04/04/2012 07:26:40 PM · #2092
Here we go...


04/05/2012 01:01:12 AM · #2093
kirbic with a hat and goatee... and a tan
 04/05/2012 01:39:13 AM · #2094
It's the chorizo from the sausage race in Milwaukee.

//www.nytimes.com/2011/10/11/sports/baseball/in-brewers-sausage-race-theyre-all-wieners.html?_r=1&pagewanted=all


Message edited by author 2012-04-05 01:42:28.
 04/05/2012 07:48:49 AM · #2095
Originally posted by Spork99:
It's the chorizo from the sausage race in Milwaukee.

//www.nytimes.com/2011/10/11/sports/baseball/in-brewers-sausage-race-theyre-all-wieners.html?_r=1&pagewanted=all


You're good. And you're up!
 04/05/2012 09:26:47 AM · #2096
Originally posted by kirbic:
Originally posted by Spork99:
It's the chorizo from the sausage race in Milwaukee.

//www.nytimes.com/2011/10/11/sports/baseball/in-brewers-sausage-race-theyre-all-wieners.html?_r=1&pagewanted=all


You're good. And you're up!


I remember it from the tripping incident.
 04/05/2012 10:59:52 AM · #2097
04/05/2012 11:52:15 AM · #2098
tape dispenser

04/05/2012 12:20:53 PM · #2099
part of a locking mechanism
 04/05/2012 01:02:05 PM · #2100
Originally posted by cowboy221977:
tape dispenser


Yep. I thought this one might take a while, I've never seen a tape dispenser that works the way this one does...not that it's a good design.
Pages:   ... [80] [81] [82] [83] [84] [85] [86] [87] [88] ... [265]
Current Server Time: 08/12/2025 10:47:10 AM

Please log in or register to post to the forums.


Home - Challenges - Community - League - Photos - Cameras - Lenses - Learn - Help - Terms of Use - Privacy - Top ^
DPChallenge, and website content and design, Copyright © 2001-2025 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 08/12/2025 10:47:10 AM EDT.