| Author | Thread |
|
|
12/23/2009 10:32:30 AM · #1 |
Some folks live and die by the sharpness of an image. I am not one of them. I am totally fine with an image being downright soft as long as it’s sharp where it needs to be. But for those who want to maximize sharpness, here are some tips. NOTE: This list isn’t comprehensive, but should be sufficient to get you started.
1. Shoot in great light. If you’re relying on autofocus, it works best in good light. If the light is poor, the AF tends to work poorly.
2. Find the sweet spot for each lens. Most beginners make the mistake of thinking that by stopping down to the smallest possible aperture, they are increasing sharpness. They are actually increasing depth-of-field. If you want the sharpest possible aperture, it’s usually somewhere in the middle of the range. Test your lenses by photographing newsprint on a flat surface in consistent, good light. This will help you find out which aperture gives you the best performance.
3. Use a steady tripod. Locking your camera down on a good, heavy tripod will help you get sharp pictures. Use a solid head, a solid tripod and a good sturdy mount. Lock down all the legs and the head for maximum sharpness.
4. Use a fast shutter speed. Faster shutter speeds reduce the effect of camera shake or movement.
5. Use the correct autofocus mode. If you’re shooting moving subjects, make sure you use your camera’s AF tracking mode. If you’re shooting static subjects, simple one-shot mode is best.
6. Avoid subject movement. If you have to work in low light with low ISO and low shutter speed, subject movement can cause you to make out-of-focus or blurry images. Make sure to ask your subject to stand as perfectly still as possible in these conditions.
7. Pick the right ISO. Use an ISO that will allow for a fast shutter speed without introducing too much noise.
8. Avoid problems related to filters. Cheap filters can reduce sharpness in your photographs. Stacked filters can cause lens flare (both the obvious kind and the less obvious kind that reduces contrast and thus apparent sharpness.)
9. Avoid using too much noise-reduction software. Too much or improperly applied noise-reduction will reduce your image sharpness.
10. Use the right amount of post-processing sharpening. Many beginning digital photographers are unaware that you need to use more post-processing sharpening for printed images than you do for images displayed on the web. If you’re printing on photo paper, adjust the image on your computer monitor so it seems just a bit too sharp on the screen. This is usually the right amount of sharpening for a print.
Information found on PhotoFocus.com
|
|
|
|
12/23/2009 10:45:18 AM · #2 |
| Great post. Lots of this I knew already but I didn't know how to find the "sweet spot" for my lens. Thanks for posting! |
|
|
|
12/23/2009 04:44:31 PM · #3 |
| Great post for newbs. Here's another trick. If your DSLR has a Mirror lock-up feature, activate it, it helps when using the tripod and especially for static subjects, macro, still life, studio. Mirror locks up out of the way, waits a fraction of a second or so and then the shutter fires. Prevents blur/wobble of the mirror slamming open and shaking the camera, especially if you have a crap tripod. Not so useful when you go handheld, or fast fps, switch it off then. |
|
|
|
12/23/2009 04:46:07 PM · #4 |
I did not learn anything in this thread but wanted to take the time to say I agree with everything here 100%. Great post and a better read if you did not know any one of the ten...
Read, Re-read until it is burnt into your head. if you have a problem with anything in this or do not understand, ask in this thread. It is very nicely written. |
|
|
|
12/23/2009 05:16:02 PM · #5 |
A tip for post processing for web, and a technique used by many here at DPC (I learned this from an  mpeters photo)
Adamus Sharpening
Resize photo to 2x the final desired file size (eg. 1600px on longest side)
Apply sharpening filter 2 or 3 times (it make look like an over-sharpened mess at this point)
Resize photo to the final desired file size (eg. 800px on longest side)
This is the trick I learned this year that has had the biggest impact on my scores. |
|
|
|
12/23/2009 05:27:04 PM · #6 |
Originally posted by Magnum_za:
Great post for newbs. Here's another trick. If your DSLR has a Mirror lock-up feature, activate it, it helps when using the tripod and especially for static subjects, macro, still life, studio. Mirror locks up out of the way, waits a fraction of a second or so and then the shutter fires. Prevents blur/wobble of the mirror slamming open and shaking the camera, especially if you have a crap tripod. Not so useful when you go handheld, or fast fps, switch it off then. |
*Grins* Learned that trick recently! I'm adding this post to my faves list. |
|
Home -
Challenges -
Community -
League -
Photos -
Cameras -
Lenses -
Learn -
Help -
Terms of Use -
Privacy -
Top ^
DPChallenge, and website content and design, Copyright © 2001-2025 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 08/25/2025 08:12:04 AM EDT.
