| Author | Thread |
|
|
04/11/2008 09:33:31 PM · #1 |
Ok, so I have received the new body. I went through all the set-ups and read the manual. But I still am having a problem. No matter what I have the camera set to I can only get AUTO-200...1600 ISO. Expansion is set to enable (no 'H') and I can never select ISO 100 (auto after 200). I am in manual mode and should be able to select them but auto comes after 200 and 1600 is highest. What have I missed/am I doing wrong?
1.0.8 for firmware... |
|
|
|
04/11/2008 09:42:46 PM · #2 |
Turn off highlight tone priority and you can then get the other settings. If you look at your ISO I'd bet it shows 2oo and not 200. With highlight tone priority on you cannot get the low end or the high end of the ISO settings. Maybe take another look at the manual.
Matt
Message edited by author 2008-04-11 21:43:24. |
|
|
|
04/11/2008 09:48:06 PM · #3 |
Perfect! Thank you! I knew it had to be something simple.
Chalk another one up to stupidity. I thought I had read the manual and thought I knew the routine when setting it up for the first time.
Despite the error in my ways, it is a sweet camera and the 4 shots I have taken with it have me itching to go out and shoot again.
Message edited by author 2008-04-11 22:13:30. |
|
Home -
Challenges -
Community -
League -
Photos -
Cameras -
Lenses -
Learn -
Help -
Terms of Use -
Privacy -
Top ^
DPChallenge, and website content and design, Copyright © 2001-2025 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 12/28/2025 05:28:18 PM EST.
