| Author | Thread |
|
|
01/01/2012 11:54:13 AM · #301 |
|
|
|
01/01/2012 11:56:48 AM · #302 |
| if it was the 70's i'd have to say roach clip! |
|
|
|
01/01/2012 12:00:44 PM · #303 |
Originally posted by kawesttex:
Think inside the box! |
Tube puller?
|
|
|
|
01/01/2012 12:02:23 PM · #304 |
Originally posted by kirbic:
Originally posted by kawesttex:
Think inside the box! |
Tube puller? |
Bingo, we used them to pull hot tubes when troubleshooting equipment.
You're up! |
|
|
|
01/01/2012 12:18:02 PM · #305 |
|
|
|
01/01/2012 12:22:39 PM · #306 |
| Yes, vacuum tubes. When the instruments are on the tubes can get very hot. |
|
|
|
01/01/2012 12:39:30 PM · #307 |
Originally posted by C_Steve_G:
Hot tubes? |
LOL, yep, I'm an old fart. I've burned myself on hot vacuum tubes. It frickin' hurts!
ETA: I'll post something shortly...
Message edited by author 2012-01-01 12:40:01.
|
|
|
|
01/01/2012 12:58:19 PM · #308 |
Here it is:
ETA: I've posted this at 1600px size to give more detail. Don't know if that helps or hurts, LOL.
Message edited by author 2012-01-01 12:59:00.
|
|
|
|
01/01/2012 01:12:53 PM · #309 |
| it's a solenoid (electromagnetic device) that's been cut in half for a cross-sectional view. |
|
|
|
01/01/2012 02:09:48 PM · #310 |
Originally posted by C_Steve_G:
it's a solenoid (electromagnetic device) that's been cut in half for a cross-sectional view. |
LOL, that wasn't supposed to be that easy! You're up Steve!
|
|
|
|
01/01/2012 02:46:53 PM · #311 |
Shoulda used a tripod... |
|
|
|
01/01/2012 05:08:09 PM · #312 |
|
|
|
01/01/2012 05:12:29 PM · #313 |
|
|
|
01/01/2012 05:17:47 PM · #314 |
Originally posted by sinistral_leo:
It's a spring! ;-) |
Good one, but for what?
Message edited by author 2012-01-01 17:26:21. |
|
|
|
01/01/2012 05:18:34 PM · #315 |
Originally posted by kirbic:
Mousetrap spring? |
Nope.
The wire diameter is 3/16 inch.
It's about 50 years old. But still in use (when installed, of course.)
Message edited by author 2012-01-01 17:26:48. |
|
|
|
01/01/2012 05:31:38 PM · #316 |
Hmmm.
50 years, so whatever was assembled in the early '60s. The color and absolute lack of corrosion makes me believe that it was installed either immersed in oil, or in a system that used pressurized oiling. The design and wear pattern suggest a high number of operation cycles.
Was the spring a part of an aircraft engine?
|
|
|
|
01/01/2012 05:35:55 PM · #317 |
Originally posted by kirbic:
Hmmm.
...
Was the spring a part of an aircraft engine? |
No. Something you and I have had a few of, but I don't know if yours were ever "vintage". |
|
|
|
01/01/2012 05:39:51 PM · #318 |
Originally posted by C_Steve_G:
Originally posted by kirbic:
Hmmm.
...
Was the spring a part of an aircraft engine? |
No. Something you and I have had a few of, but I don't know if yours were ever "vintage". |
Hah! Shifter return spring from a motorcycle?
|
|
|
|
01/01/2012 05:41:41 PM · #319 |
Originally posted by kirbic:
...
Hah! Shifter return spring from a motorcycle? |
Wrong end of the engine... |
|
|
|
01/01/2012 05:43:54 PM · #320 |
Originally posted by C_Steve_G:
Originally posted by kirbic:
...
Hah! Shifter return spring from a motorcycle? |
Wrong end of the engine... |
?? That's not a valve spring, is it ??
|
|
|
|
01/01/2012 05:48:12 PM · #321 |
Originally posted by kirbic:
...
?? That's not a valve spring, is it ?? |
You got it. It's known as a hairpin valve spring, used in pairs.
Here's it installed:
... in this engine:
 |
|
|
|
01/01/2012 05:57:09 PM · #322 |
Ya learn something new every day!
I honestly had no idea such a valve spring design existed! On what make/model bikes were they used?
I'll post up something here shortly, hopefully a little harder than the last one!
|
|
|
|
01/01/2012 06:23:53 PM · #323 |
OK, here it is...
|
|
|
|
01/01/2012 06:27:03 PM · #324 |
| A micro chip for something? I don't think that is right but it is the best thing I could come up with. Lol. |
|
|
|
01/01/2012 06:35:04 PM · #325 |
Originally posted by mbrutus2009:
A micro chip for something? I don't think that is right but it is the best thing I could come up with. Lol. |
Nope... although one might eventually be nearby. :-)
|
|
Home -
Challenges -
Community -
League -
Photos -
Cameras -
Lenses -
Learn -
Prints! -
Help -
Terms of Use -
Privacy -
Top ^
DPChallenge, and website content and design, Copyright © 2001-2024 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 04/25/2024 11:43:27 AM EDT.
