| Author | Thread |
|
|
11/27/2010 05:48:56 PM · #1 |
I have a picture and someone wants to blow it up for a christmas gift for someone. I have no clue why as its not that great of a picture but she wants to make it 24x16.
Question is the orginal photo on my computer is
pixel dimensions are
2100x1257
document size is
17.78x10.64cm
resolution 300 pixels.
Now I have no idea how to go about making this file good for her to blow up.
|
|
|
|
11/27/2010 05:52:27 PM · #2 |
| I should also mention that the photo is HDR |
|
|
|
11/27/2010 05:53:04 PM · #3 |
What software/version are you using?
Note that your pixel dimensions are not proportional to 24x16 -- you either have 24x14.5 or 26.75x16 -- something will have to be cropped or you will have to fill in with some blank area.
Message edited by author 2010-11-27 17:57:09. |
|
|
|
11/27/2010 06:40:31 PM · #4 |
| Is the original file that big? Or is that what your cropped photo is? If it's a crop do you still have the original that you can work with? |
|
|
|
11/27/2010 07:04:55 PM · #5 |
| I prefer C4 for blowing stuff up. |
|
|
|
11/27/2010 07:17:37 PM · #6 |
You might want to check the terrorist thread and see if you can get it through the pat down.
eta: You would be surprised at what sizes can be printed with just a little effort. Some careful upsizing may get you there.
Message edited by author 2010-11-27 19:19:09. |
|
|
|
11/28/2010 09:06:20 PM · #7 |
oh I am so lost. I have Photoshop C4, but I do not know how to use it very well. I got in to photography awhile ago but kinda gave up due to lack of time and understand lol.
|
|
|
|
11/28/2010 09:16:28 PM · #8 |
You can try this tutorial on resampling
Or ...
• Go to Image > Image Size
• Check that "Resample image" and Constrain proportions" are both checked, use the BiCubic Smoother algorithm
• Enter the critical dimension (24" or 16") in the appropriate box, then enter 150 in the resolution (pixels/inch) box
• Crop/apply borders as necessary
• Choose "SaveAs" to save a new version
• Flatten the image and sharpen as necessary
• Choose "SaveAs" to save the final version while retaining the earlier versions in case there's a problem.
150 pixels/inch should give you decent print quality |
|
|
|
11/28/2010 09:38:48 PM · #9 |
You need to determine the viewing distance. 18cm x 11cm is a relatively small image to view, and I suspect that viewers will scrutinize the shot, if it isn't large. This means that you should be careful not to enlarge too much, but then again,
it depends on the shot. Some photos look charming soft, others do not.
I would start copying the original and enlarge the image in increments of 10% at a time (Image Size/PS), and see, if the image quality is still acceptable after each step. This way you should be able to approach the desired dimension, although not precisely, since the original image ratio has remained unchanged. Beyond that you would have to use interpolation software like Genuine Fractals, which is probably more than want to do here.
|
|
Home -
Challenges -
Community -
League -
Photos -
Cameras -
Lenses -
Learn -
Prints! -
Help -
Terms of Use -
Privacy -
Top ^
DPChallenge, and website content and design, Copyright © 2001-2024 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 04/17/2024 10:25:48 PM EDT.
