DPChallenge: A Digital Photography Contest You are not logged in. (log in or register
 

DPChallenge Forums >> Hardware and Software >> Graphic's Card Dilemna
Pages:  
Showing posts 1 - 13 of 13, (reverse)
AuthorThread
07/01/2006 09:19:11 PM · #1
Hi, I am seeking some advice as to which Graphics card to buy for my PC. I bought a new Dell 24" LCD last week, with the intention of using it with photoshop to muck around with images. The monitor comes with a DVI connection which I am led to beleive gives better quality when viewing images. My PC however only has the standard VGA port which I currently have the LCD connected to. To get the best out of the monitor I am going to have to buy a new graphics card that supports DVI connection. I currently run an old NVIDIA GeForce MX/MX 400 card (only VGA)

My question to those knowledgeable in this area is: What is the best card to get, for a photographer? I don't play games on the PC so I don't need a 3D card, 2D will suffice. I have read in some Online Forums that MATROX make a good card, specifically the MATROX P750.

I would really appreciate any advice you could give

Many thanks
sneakypete
07/01/2006 09:54:05 PM · #2
Matrox or Nvidia would be a good choice. 256MB or greater.

If you are looking for a really good deal though, I found this on XPBargains:

XFX GeForce 6200A 128MB DDR AGP DVI Graphics Card $27 shipped
07/01/2006 09:58:42 PM · #3
AGP or PCI Express slot?

Can you even buy a 2d card? I think you will be looking at a 3d card even if you dont game..

I have a radeon X700 pro 256MB (PCI Express)-- cheap by current card prices and it is awesome..

Message edited by author 2006-07-01 22:07:55.
07/01/2006 10:04:40 PM · #4
I have a Radeon 9600, got it with my LCD but have never found the room to dual monitor with it (the reason for purchase).
07/01/2006 10:07:10 PM · #5
Thanks for the advice. What does AGP and PCI express slot mean though? I have no idea
07/01/2006 10:09:31 PM · #6
Well you are probably running intergrated video right now-- but you should have an open card slot to put in a new card, what type of PC is it, how old? Any specs you can share?
07/01/2006 10:16:03 PM · #7
You can open up the PC and see what type of bus the graphics card is on; if it's AGP it should be the closest slot to the ports on the motherboard, usually a brown slot, and if it's PCI it'll be any of the lower ones, usually a white slot.
07/01/2006 10:16:40 PM · #8
Computer about 5 years old
Intel Pentium 4 1.5GB CPU
512 MB RAM
40GB 7200rpm Hard disk
64MB Geforce 2 MX AGP video card with TV out
ATX tower case
Looks like there are two spare slots underseath the VGA connection on the CPU. Is that where i would put the new card if I got one.
Thanks Buzzrock
07/01/2006 10:21:53 PM · #9
Well you are gonna defintly go with agp being 5 years old--

The empty slots are most likely the traditional PCI slot-- not PCI Express for graphics.. these are for like modems and sound cards..


07/01/2006 10:22:06 PM · #10
What you will want to do when you get your new AGP video card is to uninstall your NVidia drivers and then shut off the computer. Remove the GeForce2 card- your new card will go in its place. It won't fit in any of the other slots. Once it is all connected, boot up. It will go through a hardware check and then you can install your new video card drivers (should come on a CD with your new card).
07/01/2006 10:33:34 PM · #11
Thanks for the help guys, I think I will go with something from either NVIDIA or ATI (Radeon 9600) around the 256MB mark
07/01/2006 10:36:06 PM · #12
Just remember to get the most out of your new card-- download the latest drivers after install--
For the record I dont uninstall prevoius drivers i just overwrite them, probably not a good idea, but just a habit I got into..

07/04/2006 06:27:18 PM · #13
Originally posted by justintu:

Matrox or Nvidia would be a good choice. 256MB or greater.

If you are looking for a really good deal though, I found this on XPBargains:

XFX GeForce 6200A 128MB DDR AGP DVI Graphics Card $27 shipped


256MB or greater?? do you know what all that RAM is for?? its not for displaying a 2D picture on your screen!!!

1600x1200px needs 8MB of RAM to display 24bit (32bit) the rest of that RAM is for textures in 3D applications/games

go with Matrox for the best 2D display

and an MX400 is a GeForce2 graphics card running on AGP

Message edited by author 2006-07-04 18:29:52.
Pages:  
Current Server Time: 04/19/2024 04:07:53 PM

Please log in or register to post to the forums.


Home - Challenges - Community - League - Photos - Cameras - Lenses - Learn - Prints! - Help - Terms of Use - Privacy - Top ^
DPChallenge, and website content and design, Copyright © 2001-2024 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 04/19/2024 04:07:53 PM EDT.