| Author | Thread |
|
|
01/19/2008 01:01:18 PM · #176 |
Originally posted by cpanaioti:
Originally posted by Tez:
I didn't use the original raw file because for some reason you cannot preview the RAW thumbnail like you can in say, CS2, so you know which picture you are actually loading into the program. You have to make do with 6418_CR2 which isn't much help.
|
My solution to that is to use Lightroom to determine which image to use then from Lightroom show in windows explorer and drag onto the Wukong window. You can drag multiple files at the same time. |
You can drag them from Adobe Bridge too, it's very simple :) |
|
|
|
01/19/2008 03:58:43 PM · #177 |
Hey Ben,
Aren't those F16 engine's images suposed to be classified?
Russian MIG's designers could be dpcers's too!!. Thanks god HDR software has screwed up the deatils :-)
Wait a minute, cold war is over, isn`t it?..never mind.
Originally posted by BHuseman:
Oh man, I found a new feature that I absolutley love that this program has.
..
Ok, here is another file. The one on the left was a Photoshop HDR and the one on the right was done using the Project Wukong Software. the Wukong software produced a better image in my opinion.
 
Photoshop<------------------------------->Wukong |
|
|
|
|
01/19/2008 06:13:36 PM · #178 |
Originally posted by Tez:
I didn't use the original raw file because for some reason you cannot preview the RAW thumbnail like you can in say, CS2, so you know which picture you are actually loading into the program. You have to make do with 6418_CR2 which isn't much help. |
You can view RAW images just like you can jpegs with this download. I have it on my machine and I love it.
Link-adee-link |
|
|
|
01/19/2008 07:24:18 PM · #179 |
Originally posted by Dirt_Diver:
Originally posted by Tez:
I didn't use the original raw file because for some reason you cannot preview the RAW thumbnail like you can in say, CS2, so you know which picture you are actually loading into the program. You have to make do with 6418_CR2 which isn't much help. |
You can view RAW images just like you can jpegs with this download. I have it on my machine and I love it.
Link-adee-link |
Only if your camera raw file is supported. Mine isn't but I shoot raw + jpg so windows explorer shows the jpeg.
|
|
|
|
01/19/2008 11:06:17 PM · #180 |
Originally posted by cpanaioti:
Originally posted by Dirt_Diver:
Originally posted by Tez:
I didn't use the original raw file because for some reason you cannot preview the RAW thumbnail like you can in say, CS2, so you know which picture you are actually loading into the program. You have to make do with 6418_CR2 which isn't much help. |
You can view RAW images just like you can jpegs with this download. I have it on my machine and I love it.
Link-adee-link |
Only if your camera raw file is supported. Mine isn't but I shoot raw + jpg so windows explorer shows the jpeg. |
have you tried it with your raw images? |
|
|
|
01/19/2008 11:29:29 PM · #181 |
Originally posted by Dirt_Diver:
Originally posted by cpanaioti:
Originally posted by Dirt_Diver:
Originally posted by Tez:
I didn't use the original raw file because for some reason you cannot preview the RAW thumbnail like you can in say, CS2, so you know which picture you are actually loading into the program. You have to make do with 6418_CR2 which isn't much help. |
You can view RAW images just like you can jpegs with this download. I have it on my machine and I love it.
Link-adee-link |
Only if your camera raw file is supported. Mine isn't but I shoot raw + jpg so windows explorer shows the jpeg. |
have you tried it with your raw images? |
RAW thumbs don't show. It appears not to support the 40D. |
|
|
|
01/19/2008 11:31:20 PM · #182 |
| Well I dont know what happened but when I installed the porgramme and then installed the net frame programme it started doing strange things to my computer, error reports etc. So I uninstalled the nete frame programme and had even more serious error reports. My brother came to visit today and had to do a system restore for me which didn't happen easily due to the error reports I kept getting. Computer back to normal now. So I think I will leave this one alone. A pity because I really wanted to give this a try. |
|
|
|
01/20/2008 12:12:54 AM · #183 |
Canon used to have a Raw Image viewer Codec that you could download off their site so that you can see 40D files in Windows Vista. I have it running on my computer and have full view of the files. I tried to find the link on the site for you but couldn't see it anymore.
Maybe somebody on this site has it saved on their computer and can get it to you.
Originally posted by cpanaioti:
Originally posted by Dirt_Diver:
Originally posted by cpanaioti:
Originally posted by Dirt_Diver:
Originally posted by Tez:
I didn't use the original raw file because for some reason you cannot preview the RAW thumbnail like you can in say, CS2, so you know which picture you are actually loading into the program. You have to make do with 6418_CR2 which isn't much help. |
You can view RAW images just like you can jpegs with this download. I have it on my machine and I love it.
Link-adee-link |
Only if your camera raw file is supported. Mine isn't but I shoot raw + jpg so windows explorer shows the jpeg. |
have you tried it with your raw images? |
RAW thumbs don't show. It appears not to support the 40D. |
|
|
|
|
01/20/2008 01:03:41 PM · #184 |
Here's my first try with it - [thumb]635435[/thumb] (plus a little extra moon in there for fun)
After using Photomatix for a year, this new software seems to have more contrast and the immages appear less "flat" than in Photomatix. There's a lot more detail in the new program.
Message edited by author 2008-01-20 13:05:45. |
|
|
|
01/20/2008 01:51:50 PM · #185 |
Originally posted by cpanaioti:
Originally posted by Dirt_Diver:
Originally posted by Tez:
I didn't use the original raw file because for some reason you cannot preview the RAW thumbnail like you can in say, CS2, so you know which picture you are actually loading into the program. You have to make do with 6418_CR2 which isn't much help. |
You can view RAW images just like you can jpegs with this download. I have it on my machine and I love it.
Link-adee-link |
Only if your camera raw file is supported. Mine isn't but I shoot raw + jpg so windows explorer shows the jpeg. |
The Vista Codec works with WinXP SP2...
//www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=314&modelid=15653
Looks like they put a new one up on the 8th of Jan.
Note: You have to select an Operating System from the OS drop-down menu to see the Codec and a couple other drivers.
Message edited by author 2008-01-20 13:54:21. |
|
|
|
01/20/2008 02:40:34 PM · #186 |
Originally posted by awpollard:
Originally posted by cpanaioti:
Originally posted by Dirt_Diver:
Originally posted by Tez:
I didn't use the original raw file because for some reason you cannot preview the RAW thumbnail like you can in say, CS2, so you know which picture you are actually loading into the program. You have to make do with 6418_CR2 which isn't much help. |
You can view RAW images just like you can jpegs with this download. I have it on my machine and I love it.
Link-adee-link |
Only if your camera raw file is supported. Mine isn't but I shoot raw + jpg so windows explorer shows the jpeg. |
The Vista Codec works with WinXP SP2...
//www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=314&modelid=15653
Looks like they put a new one up on the 8th of Jan.
Note: You have to select an Operating System from the OS drop-down menu to see the Codec and a couple other drivers. |
Nope. Still can't see 40D files as thumbs in explorer. |
|
|
|
01/20/2008 10:32:02 PM · #187 |
Ok, here is another comparison between my bridge photo from the Wukong Software and Photomatix.
 Photomatix Software
 Project Wukong
I personally like the Project Wukong Software version more than I do the Photomatix version. I did this same file earlier this weekend and the results weren't as good as this file came out. I also don't think that this has the cartoonish look that many people complain about.
Thoughts?
Message edited by author 2008-01-20 22:33:16.
|
|
|
|
01/21/2008 08:52:54 PM · #188 |
A couple of images through wukong...
[thumb]636608[/thumb] [thumb]636621[/thumb]
Message edited by author 2008-01-21 21:17:15. |
|
|
|
01/27/2008 06:36:18 AM · #189 |
| Fire a PM this way, please. |
|
|
|
01/27/2008 12:01:27 PM · #190 |
| Don't know if this has been asked before, but it doesn't look like Wukong has support for Pentax RAW files yet. At least they don't show up in the open menu box when selecting pics to generate HDRs from. |
|
|
|
01/27/2008 01:46:06 PM · #191 |
Originally posted by EstimatedEyes:
Don't know if this has been asked before, but it doesn't look like Wukong has support for Pentax RAW files yet. At least they don't show up in the open menu box when selecting pics to generate HDRs from. |
Join the forum and request them, if you send them some of your RAW files for testing they would be very appreciative.. |
|
|
|
01/30/2008 05:02:34 PM · #192 |
A tentative Pentax raw support is in the next version (due in 48 hours). However, this does not include support of K20D.
We do not have enough raw files to test, so any Pentax photographers, please join us and help.
//imagingluminary.org/support/index.php?board=2.0
We also have Olympus raw support in this version.
|
|
|
|
01/30/2008 07:23:31 PM · #193 |
| Thanks guys. Soon as I get a moment, I'll join the forum and ship some Pentax RAW files your way. |
|
|
|
02/01/2008 02:52:05 PM · #194 |
A new build #273 is available to registered members.
Project Wukong Support Forum
|
|
|
|
02/02/2008 11:08:58 AM · #195 |
| Is it too late to participate in this test? |
|
|
|
02/02/2008 11:15:54 AM · #196 |
There are only 7 seats left; first come first serve.
To join, register at product forum
Message edited by author 2008-02-08 17:54:16. |
|
|
|
02/29/2008 10:07:17 PM · #197 |
The beta program will continue until end of March of 2008.
To join, just register at the forum:
//imagingluminary.org/support/index.php?board=2.0
|
|
|
|
03/27/2008 11:43:02 AM · #198 |
| anyone using this much ? I posted a couple of samples here. Very fast and works quite well. |
|
|
|
03/27/2008 12:31:41 PM · #199 |
I like this program.... very easy to use....
|
|
|
|
03/27/2008 01:00:57 PM · #200 |
| I like your samples Gordon. The time limit expired on my version so I got Lucis Arts which seems to very similar things on low settings if you use the sculpture or exposure modes. |
|
Home -
Challenges -
Community -
League -
Photos -
Cameras -
Lenses -
Learn -
Prints! -
Help -
Terms of Use -
Privacy -
Top ^
DPChallenge, and website content and design, Copyright © 2001-2024 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 04/23/2024 08:49:45 PM EDT.
